## VTU 1st Year Important Questions | VTU Question Bank

In this post, you will get the Important Questions and Question bank of 1st year of all P Cycle and C cycle Subjects. VTU 1st Year C cycle Important Questions…

In this post, you will get the Important Questions and Question bank of 1st year of all P Cycle and C cycle Subjects. VTU 1st Year C cycle Important Questions…

4.C] Three phase power consumed by the balanced load is given by 𝑃 = √3𝑉𝐿 𝐼𝐿cos(∅) watts, then show that two wattmeter sufficient to measure three phase power P. Answer:…

4.B] Two circuits, the impedances of which are given by 𝑍1 = 10 + 𝑗15 Ω and 𝑍2 = 6 − 𝑗8 Ω, are connected in parallel. If the total…

4.A] With the help of a phasor diagram, show that the current drawn by the R-C series circuit, leads the applied voltage by an angle ∅ with respect to voltage.…

3.C] A three single phase balanced load connected in three phase three wires star form, with the help of phasor diagram, obtain the relationship between line and phase quantities of…

3.B] A voltage of 125 V at 60 Hz is applied across a non-inductive resistor connected in series with a capacitor. The current is 2.2 A. The power loss in…

3.A] With the help of a phasor diagram, show that the current drawn by the R-L series circuit, lags the applied voltage by an angle ∅ with respect to voltage.…

6 c] To operate the transformer in maximum efficiency always derive at what condition this can be achieved.

6 b] A 4-pole, 500V, shunt motor has 720 wave-connected conductors on its armature.The full-load armature current is 60 A, and the flux per pole 0.03 Weber’s. Thearmature resistance is…

6 a] A dc motor running with a speed of N rpm obtain an expression for EMF induced in the armature winding. Solution : When the Armature of D C…